Marine Bow Thruster
Bow Thruster Side-Power Marine Systems, manufacturer the world’s most comprehensive line of Bow Thruster and Stern Thruster for leisure boats and smaller commercial boats, and we can therefore offer a suitable thruster for almost every boat under 160 feet. To enable the most safe and easy installation as well as the best possible performance for a variety of boats and usages, Side Power thruster are offered in several versions to satisfy all requirements.
SE series SIDE-POWER
“SE” STANDARD (ON/OFF) DC ELECTRIC BOW THRUSTER
The first Side-Power thruster was developed in 1985 and today’s tunnel thruster are a result of almost 30 years of development. As the main Sleipner product, it has been continually developed and improved over the years. Today, Side-Power is widely recognized as the world leader within our segment. An overwhelming number of the world’s leading boat builders choose Side-Power for their fine vessels.
Side-Power has always been at the forefront of thruster innovation and today’s SE series thruster has a series of patented safety solution. The SE series have been installed in tens of thousands of boats around the world for almost three decades. We dare to claim that it is very hard to find a more sturdy and proven construction than that of the SE series.
Our tunnel thruster can be installed as bow and/or stern thruster and are delivered in both a standard and a PRO version. The PRO version are equipped with a DC speed control, which gives you full proportional control of the thruster. If you plan to install both bow and stern thruster, the system offers the unique Hold-function which pin the boat to the pier while docking.
“SE-IP” (ON/OFF) INGNITION PROTECTED BOW THRUSTER
Introducing the upgraded and versatile Side-Power thruster in a gas- and watertight version. With enhanced features and a wider model range, these IP versions offer the same reliability and proven performance as our SE series.
To ensure reliable and safe thruster installations in various boats, we offer modified DC electric thrusters housed in watertight enclosures. Designed for stern and other wet or gasoline-exposed locations, these thrusters are fully ignition protected (ISO 8846) for gasoline engine boats.
Featuring a hermetically sealed composite housing, they prevent gasoline fumes from entering and being ignited by sparks. Additionally, these thrusters provide comprehensive protection for electric components susceptible to water damage, making them ideal for stern installations in challenging conditions.
|• Certified to ISO 8846 Ignition Protected standards.• Water proof (Not for submerged mounting)
• Tinned plated brass terminals
• Manufactured, tested and delivered as a ready sealed unit, ensuring that the installer does
not have to fit any other parts that can jeopardize the hermetical seal.
|• Supplied with plug and go control cable.• Ignition protected housing can be opened and thereby retains serviceability of
components inside the enclosure.
• Available as SEP-IP versions with DC Speed Control.
SE PRO series, Speed Control DC Thruster SIDE-POWER
“SEP” PRO SPEED CONTROL DC BOW THRUSTER
Yachtaid Marine presents an innovative solution for precise control in any condition. With the new DC Speed Control, you have the flexibility to adjust your thruster’s speed, ensuring optimal thrust management. By installing both bow and stern thrusters with effect regulation, you gain access to the unique Hold function, effortlessly docking your boat single-handedly.
In 2011, the DC Speed Control system was honored with the esteemed Innovation Award at the Miami Boat Show, a recognition highly esteemed by global equipment manufacturers in the industry.
INSTALLATION KIT BOW THRUSTER SIDE-POWER
Bow Thruster Side Power With Installation Kit
This listing includes:
- JOYSTICK or BOAT PANEL ROUND
- BOW TUNNEL
- ANL FUSE (X2)
- CONTROL HARNESS 4 WIRE
- CONTROL HARNESS 5 WIRE
- AUTOMATIC MAIN SWITCH/FUSE HOLDER
- ZINC ANODE (X2)