Lofrans Tigres 1500W 12V Windlass

Key Specifications at a Glance

The exact gypsy configuration must match the chain diameter, pitch, and standard used aboard the vessel. Confirm compatibility before selecting an option or placing the order.

Lofrans Tigres Horizontal Windlass: Key Features

The Lofrans Tigres 1500W 12V windlass is designed to provide controlled anchor handling aboard boats approximately 36 to 49 feet long. Its horizontal configuration combines the gypsy and rope drum in a compact, marine-grade anodized aluminum housing suitable for demanding anchoring environments.

• 1500W motor: Provides the pulling power required for anchor retrieval on properly matched 12V electrical systems.
• Horizontal windlass configuration: Keeps the gypsy, rope drum, and operating components accessible above deck.
• Independent gypsy and rope-drum operation: Allows the chainwheel and drum to be controlled separately according to the anchoring task.
• Manual chain release: Gives the operator additional control when deploying the anchor.
• Emergency manual override: Allows manual operation if electrical power is unavailable.
• IP66-rated motor: Helps protect the electric motor from water and dust exposure in marine conditions.
• Fast retrieval: Supports a maximum listed retrieval speed of up to 80 feet per minute.
• Multiple gypsy options: Allows the windlass to be ordered for different chain sizes and configurations.
• Optional automatic freefall: May be available depending on the selected configuration and installation requirements.

Electrical performance, retrieval capacity, and operating speed depend on correct cable sizing, battery condition, installation quality, chain selection, and anchoring load.

Chain, Gypsy and Rope Compatibility

The Lofrans Tigres windlass is offered with different gypsy or chainwheel options for selected 1/4″, 5/16″, and 3/8″ anchor-chain configurations. However, nominal chain diameter alone is not enough to confirm compatibility. The gypsy must also match the chain’s pitch, link dimensions, and manufacturing standard.

Before ordering, verify:

• the existing chain diameter;
• the chain pitch and standard;
• the gypsy or chainwheel currently installed;
• whether the anchoring system uses chain only or a rope-and-chain combination;
• the diameter and construction of the rope used with the drum;
• the vessel’s 12V electrical system and available mounting space.

The rope drum is currently listed for rope sizes ranging from approximately 1/2″ to 3/4″. The correct rope diameter may vary according to the line material, construction, vessel setup, and intended anchoring load.

Do not assume that two chains with the same stated diameter will fit the same gypsy. YachtAid Marine can help confirm the correct configuration using the windlass model, chain measurements, existing gypsy markings, product photos, and vessel specifications.

Standard Equipment Included

The published Lofrans Tigres 1500W 12V windlass package includes the primary components required for electrical control and manual operation. Exact contents may vary according to the selected gypsy, chain configuration, and product availability, so the package should be confirmed before ordering.

• Watertight control box: Supports protected electrical switching between the helm controls and the windlass motor.
• Two footswitches: Allow deck-level operation during anchor deployment and retrieval.
• Selected gypsy or chainwheel: Supplied according to the chain size and standard chosen when ordering.
• Manual override handle: Enables emergency manual operation when electrical power is unavailable.
• Rope drum: Provides a separate working surface for handling rope or mooring lines.
• Installation hardware and documentation: Included where specified by the manufacturer for the selected configuration.

Optional accessories, including remote controls, additional switches, circuit protection, wiring components, or automatic freefall equipment, may need to be ordered separately. Confirm the exact package contents and gypsy selection with YachtAid Marine before purchase.

Lofrans 1500W Windlass Technical Specifications

Maximum pull and retrieval speed are published performance values and should not be treated as the recommended continuous working load. Actual operation depends on the vessel’s electrical system, cable length and gauge, battery condition, installation quality, anchor weight, chain configuration, and operating conditions.

Electrical and Installation Requirements

The Lofrans Tigres 1500W 12V windlass must be installed on a properly sized 12V DC electrical system. Correct cable sizing, circuit protection, mounting, and chain-locker alignment are essential for reliable operation and to prevent excessive voltage drop or mechanical loading.

Before installation, verify the following:

• 12V power supply: Confirm that the vessel uses a compatible 12V DC battery system.
• Battery capacity and condition: The battery bank must be able to support the windlass’s high current demand during retrieval.
• Cable gauge: Positive and negative cable size must be selected according to the total cable run and the manufacturer’s installation requirements.
• Circuit protection: Install the correct breaker, fuse, or thermal protection specified for the motor and cable size.
• Control box location: Mount the control box in a protected, accessible area and follow the manufacturer’s wiring diagram.
• Mounting surface: The deck or mounting platform must be flat, reinforced, and capable of supporting the windlass and anchoring loads.
• Chain-locker clearance: Ensure adequate chain fall beneath the gypsy so the chain can feed freely without piling up.
• Gypsy alignment: The chain must approach the gypsy at the correct angle and remain properly aligned with the bow roller and chain locker.
• Manual access: Leave sufficient clearance to use the manual override handle and service the windlass.
• Corrosion protection: Seal deck penetrations and protect electrical terminals from moisture and salt exposure.

Installation should follow the official Lofrans manual and the applicable marine electrical standards. YachtAid Marine can help confirm the correct windlass configuration, gypsy, electrical requirements, and replacement components before installation.

Manual Override and Anchoring Operation

The Lofrans Tigres horizontal windlass combines powered anchor handling with manual control functions for situations in which the operator needs additional control or electrical power is unavailable. Its design includes independent gypsy and rope-drum operation, a manual chain-release system, and an emergency manual override.

Powered operation

During normal operation, the 1500W motor retrieves or deploys the anchor rode through the selected gypsy. The gypsy must match the diameter, pitch, and standard of the chain installed aboard the vessel.

The rope drum can be operated independently from the gypsy, allowing it to assist with rope handling or other deck operations when used within the manufacturer’s operating limits.

Manual chain release

The manual chain-release function allows the operator to control anchor deployment without relying entirely on powered downward operation. The release must be handled gradually and under control to prevent uncontrolled chain movement.

Emergency manual override

The manual override provides an alternative means of operating or recovering the anchoring system when electrical power is unavailable. Keep the supplied operating handle accessible and confirm that there is enough clearance around the windlass to use it safely.

Before using either manual function:

• secure the vessel and keep hands, clothing, and loose equipment away from the gypsy and chain;
• verify that the chain stopper or another independent load-holding device is correctly engaged when required;
• do not use the windlass to permanently hold the vessel’s anchoring load;
• follow the official Lofrans operating procedure for engaging and releasing the clutch;
• inspect the rode path to ensure the chain can enter the locker without jamming or piling up.

Automatic freefall is available as an option for certain 12V and 24V Tigres configurations. It should not be assumed to be included unless confirmed for the specific product code being ordered.

Lofrans Tigres Manual and Documentation

The official Lofrans Tigres windlass manual covers installation, electrical connections, operation, safety procedures, maintenance, and troubleshooting. Lofrans groups the Tigres documentation with the Lion 1000, Cayman, and Falkon horizontal windlasses.

Recommended documents to review before installation or service include:

• Installation and user’s manual: Provides the official installation, operating, safety, and maintenance instructions.
• Model dimensions diagram: Helps confirm available deck space, mounting position, and access around the windlass.
• Wiring information: Supports correct connection of the motor, control box, footswitches, breaker, and optional controls.
• Gypsy and chain specifications: Identifies compatible chain standards for each product configuration.
• Exploded spare-parts diagram: Helps identify replacement components using the exact Tigres model and assembly.
• Maintenance-kit technical information: Identifies the manufacturer’s service kit intended for the Tigres horizontal windlass.

The documentation must be matched to the exact product code and gypsy configuration. The current 12V Tigres range includes configurations for 8 mm or 5/16-inch chain and 10 mm or 3/8-inch chain, with different chain standards and optional rope kits.

Before installation, confirm:

• 12V motor configuration;
• gypsy product code;
• chain diameter and standard;
• rope-kit inclusion, when applicable;
• control-box and breaker requirements;
• installation clearances;
• cable size based on the complete electrical run.

For compatibility support, provide YachtAid Marine with the windlass model, product code, onboard voltage, chain measurements, existing gypsy markings, and clear photos of the installed equipment.

Maintenance and Replacement Parts

Routine Lofrans Tigres windlass maintenance helps reduce corrosion, excessive gypsy wear, electrical resistance, chain jams, and unexpected anchoring-system downtime. Maintenance intervals should follow the official manual and should be adjusted for usage frequency, salt exposure, and operating conditions.

Recommended inspection points

• Gypsy and chain: Check for worn pockets, damaged links, incorrect chain calibration, and signs that the chain is slipping or riding improperly.
• Rope drum: Inspect the drum surface and confirm that the operating mechanism moves freely.
• Clutch and manual-release components: Verify smooth engagement and controlled release without forcing the mechanism.
• Electrical terminals: Look for corrosion, heat damage, loose connections, and moisture intrusion.
• Control box and switches: Confirm consistent up-and-down operation and inspect cables and terminals.
• Mounting hardware: Check deck fasteners, backing support, sealant, and signs of movement around the installation.
• Motor and housing: Rinse external salt deposits with fresh water and inspect the protected motor-cover area for damage.
• Chain locker: Confirm sufficient chain fall and remove obstructions that could cause the rode to pile up.

Lofrans identifies incompatible or uncalibrated chain, an incorrect gypsy, and insufficient chain-locker depth as common causes of chain jamming. Replacement parts should therefore be selected only after confirming whether the problem originates in the gypsy, chain, installation geometry, or electrical system.

Lofrans Tigres replacement parts

Lofrans provides an official exploded-parts catalogue for the Tigres horizontal windlass. Available service categories include individual spare parts, gypsies, switches, circuit breakers, control boxes, handles, seals, pins, sensors, and maintenance components.

The official Lofrans Tigres Maintenance Kit, product code 72050, is listed specifically for the Tigres horizontal windlass. The exact contents should be confirmed from its technical sheet before ordering.

To identify the correct Lofrans Tigres windlass parts, provide:

• model name and product code;
• 12V electrical configuration;
• windlass serial or identification information;
• gypsy markings;
• chain diameter and standard;
• photos of the damaged component;
• description of the operating symptom.

Do not order a replacement gypsy, solenoid, motor, seal kit, or control component based only on the general Tigres model name. Component selection can vary according to voltage, production version, gypsy configuration, and chain standard.

Confirm Compatibility Before Ordering

Before purchasing the Lofrans Tigres 1500W 12V windlass, confirm that the selected configuration matches the vessel, existing anchoring system, and onboard electrical setup. A correct match helps prevent installation changes, chain engagement problems, and ordering the wrong gypsy or control components.

For a compatibility review, provide YachtAid Marine with:

• the vessel make, model, year, and approximate length;
• the existing windlass brand, model, SKU, or serial information;
• confirmation that the onboard system is 12V DC;
• clear photos of the current windlass, gypsy, chain, and identification plate;
• chain diameter, pitch, and standard, when available;
• gypsy markings or part numbers;
• anchor weight and approximate chain length;
• available mounting space and existing deck cutout dimensions;
• details of any current operating symptoms if replacing a damaged unit.

A windlass with similar power or dimensions is not automatically a direct replacement. Mounting footprint, deck clearance, chain-locker depth, cable requirements, controls, and gypsy compatibility should all be verified before ordering.

Need help confirming the correct configuration? Contact YachtAid Marine with your vessel and anchoring-system details for parts-matching support before placing the order.

FAQs About the Lofrans Tigres 1500W 12V Windlass