SXP Speed Control External Stern Drive Thruster Side Power
SX80/185T External Stern Thruster, 80 kg (176 lbs), 185mm (7.3″) tunnel
The SX80/185T is the perfect choice for boats where the inside configuration of the boat’s stern makes a standard thruster installation impractical. When fitted with the optional cowls, the stern thruster assembly is perfect for boats with twin stern drives. The special cowls enable good performance by diverting the waterflow past the stern drive legs which normally blocks the waterflow and the thrust.
Thrust @ 10.5VDC |
176 lbs (80 kg) |
Thrust @ 12VDC |
212 lbs (96 kg) |
Typical Boat Size |
35-48′ (10-15 m) |
Tunnel Diameter (I.D.) |
7.3″ (185 mm) |
Propulsion System |
Twin |
Power @ 10.5VDC |
6 hp (4.4 kw) |
Voltage |
12VDC |
Minimum Battery Capacity |
1045 CCA SAE |
Recommended Fuse Size |
400 Amps (SMANL400) |
Manufacturer |
Side-Power |
Min Depth to Top of Tunnel |
3.66″ (93mm) |
Min Depth to Center of Tunnel |
7.28″ (185mm) |
SX100/185T External Stern Thruster, 100 kg (220 lbs), 185mm (7.3″) tunnel
The SX100/185T is the perfect choice for boats where the inside configuration of the boat’s stern makes a standard thruster installation impractical. When fitted with the optional cowls, the stern thruster assembly is perfect for boats with twin stern drives. The special cowls enable good performance by diverting the waterflow past the stern drive legs which normally blocks the waterflow and the thrust.
Thrust @ 10.5VDC |
220 lbs (100 kg) |
Thrust @ 12VDC |
256 lbs (116 kg) |
Typical Boat Size |
40-56′ (12-17 m) |
Tunnel Diameter (I.D.) |
7.3″ (185 mm) |
Propulsion System |
Twin |
Power @ 10.5VDC |
8.4 hp (6.3 kw) |
Voltage |
12VDC |
Minimum Battery Capacity |
1425 CCA SAE |
Recommended Fuse Size |
500 Amps (SMANL500) |
Manufacturer |
Side-Power |
Min Depth to Top of Tunnel |
5.47″ (139mm) |
Min Depth to Center of Tunnel |
10.90″ (277mm) |
Features & Benefits:
- Pre-assembled thruster unit in a rugged GRP casing for simple external installation.
- Waterproof and ignition protected: can be installed in gasoline-powered boats.
- Requires only small holes in the boat’s transom for power/control cables and mounting.
- Serviceable when boat is lifted (refitted with new O-ring seal).
| Weight | 120 lbs |
|---|---|
| Dimensions | 20 × 20 × 20 in |
Related products
Reviews
There are no reviews yet.