The Leer bi-color recessed downlight is offered in chrome, matte chrome, or gold plated brass. The housing is a mere 0.70″ deep so it is a good choice for ceilings with limited depth behind the headliner. It may be wired to any remote 3-position on/off/on switch for bi-color operation or when wired to a Leer “Master”, bi-color dimming can be accomplished via the switch on the master unit or from a remote momentary switch. A maximum of 15 slaves may be paired with any master unit.
For dimmed circuits: To switch the lights on or off, press briefly on either the master’s built-in switch or a remote momentary switch. Brightness can be adjusted by holding down the switch. To reverse the dimming phase, release the switch briefly and press again within one second. A double click changes between the two colors. Lights that are switched off can always be switched on to blue light with a double click. If Leer single color slaves are used in the circuit, they will completely turn off when switching to the blue mode.
|Chrome Plated Brass|
Certifications & Compliance
Dimmer Control Interface
|N/O single throw momentary switch|
|2.40″(Width), 1.40″(Height), 2.80″(Length)|
Trim Ring (Bezel) Dimensions
|2.76″ (70mm) x 0.14″ (3.5mm)|
|3 Years / 1 Year Finish|
|Transient and Reverse Polarity|
Correlated Color Temperature (CCT)
Color Rendering Index (CRI)
Approximate Ship Weight (lbs)
|Dimensions||2.80 × 2.40 × 1.40 in|