Zipwake Kit box Series S

Zipwake Kit Box Series S

The Zipwake Kit Box Series S  is a complete dynamic trim control solution designed for planing and semi-planing boats up to 50 feet. Select the interceptor length, hull configuration and control system that best fits your vessel. Available with Straight or Chine interceptors and in Standard, PRO or integration-ready configurations.

Automatic Trim Control for a Smoother, More Efficient Ride

The Zipwake Kit Box Series S provides a complete Dynamic Trim Control System for planing and semi-planing boats up to 50 feet. Using fast-acting interceptors and intelligent automatic control, the system continuously adjusts the boat’s running trim and heel to improve comfort, visibility, handling and fuel efficiency.

Each Kit Box includes one matched pair of interceptors and the essential components required for installation. Select the appropriate interceptor size, hull type and control configuration for your vessel.

Key Benefits

• Automatic pitch and roll control
• Faster acceleration and improved planing performance
• Better forward visibility while cruising
• Reduced listing caused by uneven passenger or load distribution
• More balanced and comfortable turns
• Improved stability in changing wind and sea conditions
• Potential improvement in overall fuel efficiency
• Fast, precise and automatic interceptor adjustment

Zipwake Series S automatically manages running trim and helps keep the boat level, even when conditions or onboard weight distribution change.

Choose Your Interceptor Length

Select the interceptor length according to your transom space, vessel size and required lift:

• 300 mm / 11.8 in
• 450 mm / 17.7 in
• 600 mm / 23.6 in
• 750 mm / 29.5 in

The 300 mm and 450 mm models are also available in Chine configurations.

Choose Your Hull Type

Straight

Designed for installation across a straight section of the transom. Straight interceptors are suitable for a wide range of conventional planing and semi-planing hulls.

Chine

Designed for installation near the outer chine of the hull. This position uses the outermost surface of the hull to produce effective pitch and roll control and can be especially useful when transom space is limited by outboards or sterndrives.

Choose Your Control Configuration

Standard

Includes the standard Zipwake control panel for intuitive manual and fully automatic trim control directly from the helm.

PRO

Includes the Zipwake PRO system with ultra-fast interceptors and enhanced active pitch and roll response. PRO interceptors can move through their full stroke in approximately 0.3 seconds and operate five times faster than previous models.

For Integration

Includes an Integrator Module instead of the standard control panel. This configuration is designed for hardwired system integration and operation through compatible multifunction displays and connected smart devices.

PRO For Integration

Combines the ultra-fast performance of the Zipwake PRO system with an Integrator Module for a clean helm installation and integration with compatible onboard electronics.

Typical Kit Contents

Depending on the selected configuration, the Kit Box includes:

• One pair of Straight or Chine interceptors
• Interceptor cables and cable covers
• Distribution unit with power cable
• Zipwake control panel or Integrator Module
• Standard communication cable
• Installation guide
• Operator documentation
• Drill templates
• Mounting hardware
• Startup checklist

Exact contents vary between control-panel and integration versions.

Expandable System

A base Series S installation can support up to two additional interceptor pairs, allowing up to six Series S interceptors without requiring another distribution unit or power supply.

Important Selection Note

Correct interceptor sizing and placement depend on the vessel’s length, weight, hull geometry, transom layout and propulsion configuration. Professional installation and confirmation of compatibility are recommended before ordering.