3/8″ LED Rope Lighting, 12V Cool White

3/8″ LED Rope Lighting, 12V, Cool White, Length: 1 ft.

LED Rope Lighting is sold by the linear foot.  The following required parts must be purchased separately to complete your rope light installation:

For 12VDC:

• ILMDL-CONKIT-6, Connector Kit for 3/8″ Incandescent or DC-Powered LED Rope Light (Connector, & 6′ Cord)
• ILMDL-END, End Cap

For 12VAC:

• ILMDL-CON12V-L6, Connector Kit for 3/8″ 12VAC LED Rope Light when using Transformer (Connector, Rectifier & 6′ Cord)
• ILMDL-END, End Cap

Recommended Item:

Power Conditioner, regulates optimum output voltage for use with LED rope light.

Check our Knowledge Base for information on using dimmers with LED Rope Light.

Special note for household use:

• Our 120V rope light with 120V connection kit (ILMDL-CONKIT-6) may be plugged into any standard outlet without the need for an AC adapter or transformer. For hard-wiring, the plug may be removed (cut off) from the power cord. Please note that there is no ground wire. For 120V LED rope light, be sure to order the connection kit with built-in rectifier (ILMDL-CONKIT-L6).
• Our low voltage (12VDC or 24VDC) rope light may also be used for domestic use. However, it is not supplied with an AC adapter, and as it is normally hard-wired, it is not supplied with a plug. For household voltage (120V), you would need to add an appropriately sized step-down transformer (see our selection of transformers). For LED low voltage rope light (used with a transformer), be sure to order the appropriate connector kit (for 12V, use ILMDL-CON12V-L6; for 24V use ILMDL-CON24V-L6).

Specifications: