Email: info@yachtaidmarine.com
High-output white lighting from a compact thru-hull fixture
The Lumishore THX204 White provides dedicated white underwater illumination for vessels that do not require dual-color or RGBW lighting. Its 6,100 fixture lumens are distributed through an ultra-wide 110° beam, providing broad illumination around the stern, hull side or bottom of the vessel.
The thru-hull design combines a compact exterior face with a small mounting opening. Its marine-bronze body and borosilicate glass lens are designed for submerged marine use, while the 10.5–31 VDC operating range accommodates both 12V and 24V electrical systems.
Key Features
- Dedicated white LED output.
- 6,100 fixture lumens.
- Ultra-wide 110° beam.
- 10.5–31 VDC operating range.
- Marine-bronze body with borosilicate glass lens.
- IP68 water and dust protection.
- Compact 0.65 in (16.5 mm) mounting hole.
- External driver configuration.
- Simple single-color operation.
- Three-year warranty.
Technical Specifications
| Specification | Details |
|---|---|
| Light output | 6,100 fixture lumens |
| Light color | White |
| Beam angle | 110° |
| Operating voltage | 12/24 V; 10.5–31 VDC |
| Max current draw | 4.9 A at 12 V / 2.4 A at 24 V |
| Average power draw | 59 W |
| Construction | Marine-bronze body; borosilicate glass lens |
| Water/dust rating | IP68 |
| Face diameter | 3.75 in (95 mm) |
| Mounting hole | 0.65 in (16.5 mm) |
| Mounting depth clearance | 3.78 in (96 mm) |
| Frontal profile | 0.7 in (18 mm) |
| Warranty | 3 years |
Dedicated white underwater illumination
The THX204 White is designed specifically for white output rather than selectable colors or RGBW effects. This makes it suitable for installations where consistent white underwater lighting is required without the additional control architecture associated with multi-color systems.
The 110° beam provides wide light distribution, while the 6,100 fixture-lumen output gives the THX204 a defined performance level within Lumishore’s thru-hull lighting range.
Thru-hull installation considerations
Installation requires a 0.65 in (16.5 mm) mounting opening and approximately 3.78 in (96 mm) of clearance behind the mounting surface.
Before installation, confirm the available interior depth, cable routing, circuit protection, hull construction and mounting location. Each fixture should be individually protected according to the applicable Lumishore installation instructions.
Before You Order
- Confirm that dedicated white output matches the intended lighting setup.
- Verify that the vessel operates within the 10.5–31 VDC range.
- Check the required 16.5 mm mounting opening and interior clearance.
- Confirm hull construction and installation requirements.
- Plan fixture placement around the ultra-wide 110° beam.
- Verify the required driver and electrical components for the installation.
Get the Right Lumishore Light for Your Boat
YachtAid Marine can help confirm whether the Lumishore THX204 White matches your vessel voltage, hull construction and existing underwater lighting installation before ordering.
| Weight | 2 lbs |
|---|
Only logged in customers who have purchased this product may leave a review.





Reviews
There are no reviews yet.