10-40VDC, 7A x 2 (14A combined), IP40

This 2-Channel Dimmer Module provides dimming for “PWM Enabled” 2-wire Imtra PowerLED Downlights and supports a broad range of lighting configurations and control methods.

The ILIM80130 can control a large number of Power LED Downlights on each channel, only limited by the total current being drawn.  It supports PWM current switching of up to 7A per channel (168W/12VDC and 336W/24VDC combined).  It also supports Imtra 3-wire Bi-color Downlights.

Control interfaces are provided to support:

  • Single and dual momentary push buttons
  • 0-10v analog control (external voltage or potentiometer)
  • 4-20ma analog control

The two channels may be operated as totally independent lighting zones or “Paired” together so that both channels are controlled in unison.


  • Provides smooth dimming control to Imtra 2-wire Power LEDs
  • Supports bi-color dimming with a single momentary switch
  • Operates two zones independently or in unison (paired mode)
  • Supports 4-20mA analog input (from external control system)
  • Supports 0-10V potentioneter control (100k ohm)
  • Supports 0-10V analog input (from external control system)
  • Mounts with supplied brackets (or with 35mm DIN rail).


Housing Finish/Material



4.13″ l x 3.39″ w x 2.32″h

Input Voltage


Load Rating

7A/channel (14A combined)

Max Operating Temperature

49°C (120°F)

Dimmer Control Interface

NO momentary, 0-10V analog external, 0-10V potentiometer, 4-20mA external

Install Location


Ingress Protection

IP40 (applies only to frontal water exposure, i.e. Exposed surface)

Certifications & Compliance





2 Years Finish

Installation Instructions (954 KB)
Product Catalog (9 MB)

Weight 1 lbs
Dimensions 2.50 × 3.50 × 4.50 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.