Replacement blower kits – Dometic

Replacement High-Velocity Blower Kits for Dometic Marine A/C

Restore airflow fast with replacement high-velocity blower options designed for Dometic Marine Air and Cruisair systems. Use the dropdown to match your unit by BTU range and voltage (115V / 230V).

Quick Fitment Checklist (before you choose an option):

• Brand / System: Dometic Marine Air or Cruisair (marine A/C)

• Capacity: Match your unit’s BTU range (as listed on the unit plate)

• Voltage: Confirm 115V or 230V on the data plate

• Direct replacement: Options may fit series such as EBO, RE, SH, SX, SXF, VT, DTU, STX, TE, TVE (verify per unit label and selected option)

Note: Contents vary by option. Select kits include capacitor and hardware—confirm in the selected variation details before ordering.

How to select the right blower

Choosing the correct marine A/C blower motor is mainly a matching task—don’t guess. Use your unit’s identification plate and compare it to the option name in the selector.

Step-by-step selection:

1. Find the unit plate (data label)
   Look for model/series info, voltage, and capacity (BTU). This is the fastest way to avoid mismatches.

2. Confirm voltage first (115V vs 230V)
   A blower motor must match the system voltage. Select the option that explicitly states your voltage.

3. Match the BTU range
   Many replacement options are labeled by BTU range. Choose the range that matches your marine A/C system.

4. Use part references when available
   If your old part has an ID/label, match it to the option wording in the dropdown. This is especially useful when comparing dometic marine air conditioner parts across older series.

5. If you’re between two options, prioritize the exact unit model
   Similar BTU ranges can still use different blower configurations depending on series. When in doubt, cross-check the series on your unit plate (e.g., Marine Air / Cruisair series naming).

What’s included (by option)

Because this page groups multiple variants, contents depend on the option selected.

Common option types you may see:

• Replacement Blower Kit (select options):
  Typically a blower solution packaged for replacement; some options include a capacitor and mounting hardware (only when specified on the option).

• Blower Assembly (select options):
  A complete blower assembly intended as a direct replacement for specific Marine Air / Cruisair configurations.

• Blower Insert / Insulated Insert (select options):
  Some variants may reference inserts and may mention capacitor inclusion—confirm per selected option.

Important: The only safe way to confirm what’s included is to check the selected variation name/details in the dropdown before checkout.

Common symptoms you need a replacement blower

A failing blower often shows up as airflow and comfort problems first—before the A/C stops completely.

Typical signs you may need a replacement marine air conditioner blower:

• Weak airflow at vents even when the system is running

• Intermittent airflow (starts and stops unexpectedly)

• Unusual noise (rattling, scraping, vibration) coming from the air handler/blower area

• Reduced cooling performance due to poor air movement across the coil

• Frequent shutdowns related to airflow restriction (system protection behavior may vary by unit)

If you’re troubleshooting, confirm whether the issue is the blower assembly versus duct restrictions, filters, or power supply—then match the correct replacement option.

Compatibility & cross-reference

These options are intended for Dometic Marine Air and Cruisair marine A/C parts applications where a direct replacement high-velocity blower is required.

Compatibility (verify by unit plate + selected option):

• Works with Dometic Marine Air / Cruisair systems where the selected option matches:

  • Series/model (e.g., EBO, RE, SH, SX, SXF, VT, DTU, STX, TE, TVE and others as applicable)

  • Voltage (115V / 230V)

  • BTU range ( 4,000BTU, 16,000 BTU)

Cross-reference best practices (to avoid wrong orders):

• Match your unit model + voltage + BTU to the variation label.

• If your existing blower has a part ID, use it to cross-match the closest labeled option in the selector.

• For broader shopping, this product can be considered part of your dometic marine air conditioner parts and cruisair marine ac parts replacement workflow—always verify compatibility at the unit/option level.