SXP Speed Control External Stern Drive Thruster Side Power

Side-Power IPCSide-Power twin propellerSide-Power sealed driveSide-Power galvanisk skilleSide-Power Q-prop

SX80/185T External Stern Thruster, 80 kg (176 lbs), 185mm (7.3″) tunnel


The SX80/185T is the perfect choice for boats where the inside configuration of the boat’s stern makes a standard thruster installation impractical. When fitted with the optional cowls, the stern thruster assembly is perfect for boats with twin stern drives. The special cowls enable good performance by diverting the waterflow past the stern drive legs which normally blocks the waterflow and the thrust.

Thrust @ 10.5VDC

176 lbs (80 kg)

Thrust @ 12VDC

212 lbs (96 kg)

Typical Boat Size

35-48′ (10-15 m)

Tunnel Diameter (I.D.)

7.3″ (185 mm)

Propulsion System

Twin

Power @ 10.5VDC

6 hp (4.4 kw)

Voltage

12VDC

Minimum Battery Capacity

1045 CCA SAE

Recommended Fuse Size

400 Amps (SMANL400)

Manufacturer

Side-Power

Min Depth to Top of Tunnel

3.66″ (93mm)

Min Depth to Center of Tunnel

7.28″ (185mm)

 

SX100/185T External Stern Thruster, 100 kg (220 lbs), 185mm (7.3″) tunnel


The SX100/185T is the perfect choice for boats where the inside configuration of the boat’s stern makes a standard thruster installation impractical. When fitted with the optional cowls, the stern thruster assembly is perfect for boats with twin stern drives. The special cowls enable good performance by diverting the waterflow past the stern drive legs which normally blocks the waterflow and the thrust.

Thrust @ 10.5VDC

220 lbs (100 kg)

Thrust @ 12VDC

256 lbs (116 kg)

Typical Boat Size

40-56′ (12-17 m)

Tunnel Diameter (I.D.)

7.3″ (185 mm)

Propulsion System

Twin

Power @ 10.5VDC

8.4 hp (6.3 kw)

Voltage

12VDC

Minimum Battery Capacity

1425 CCA SAE

Recommended Fuse Size

500 Amps (SMANL500)

Manufacturer

Side-Power

Min Depth to Top of Tunnel

5.47″ (139mm)

Min Depth to Center of Tunnel

10.90″ (277mm)

Features & Benefits:

  • Pre-assembled thruster unit in a rugged GRP casing for simple external installation.
  • Waterproof and ignition protected: can be installed in gasoline-powered boats.
  • Requires only small holes in the boat’s transom for power/control cables and mounting.
  • Serviceable when boat is lifted (refitted with new O-ring seal).

 

Weight120 lbs
Dimensions20 × 20 × 20 in

Reviews

There are no reviews yet.

Be the first to review “SX ON/OFF External Stern Drive Thruster”

Your email address will not be published. Required fields are marked