The Leer bi-color recessed downlight is offered in chrome, matte chrome, or gold plated brass. The housing is a mere 0.70″ deep so it is a good choice for ceilings with limited depth behind the headliner. This “master” model has a built in momentary switch and the entire group (of Slave units) can be controlled from there. Or you may wire in unlimited remote momentary switches for control from any point in the room! One Leer master can control up to 15 Leer slaves.
For dimmed circuits: To switch the lights on or off, press briefly on either the master’s built-in switch or a remote momentary switch. Brightness can be adjusted by holding down the switch. To reverse the dimming phase, release the switch briefly and press again within one second. A double click changes between the two colors. Lights that are switched off can always be switched on to red light with a double click. If Leer single color slaves are used in the circuit, they will completely turn off when switching to the red mode.
|Matte Chrome Plated Brass|
Certifications & Compliance
Dimmer Control Interface
|Integrated switch (or remote momentary switch)|
Trim Ring (Bezel) Dimensions
|2.76″ (70mm) x 0.14″ (3.5mm)|
|3 Years / 1 Year Finish|
|Transient and Reverse Polarity|
Correlated Color Temperature (CCT)
Color Rendering Index (CRI)
Approximate Ship Weight (lbs)