Marine Thruster, Bow Thruster, Stern Thruster, Side Power
Marine Bow Thruster
Side Power Marine Thruster Systems, manufacturer the world’s most comprehensive line of Bow Thruster and Stern Thruster for leisure boats and smaller commercial boats, and we can therefore offer a suitable thruster for almost every boat under 160 feet. To enable the most safe and easy installation as well as the best possible performance for a variety of boats and usages, Side Power thruster are offered in several versions to satisfy all requirements.
“SE” STANDARD (ON/OFF) DC ELECTRIC BOW THRUSTER
The first Side-Power thruster was developed in 1985 and today’s tunnel thruster are a result of almost 30 years of development. As the main Sleipner product, it has been continually developed and improved over the years. Today, Side-Power is widely recognized as the world leader within our segment. An overwhelming number of the world’s leading boat builders choose Side-Power for their fine vessels.
Side-Power has always been at the forefront of thruster innovation and today’s SE series thruster has a series of patented safety solution. The SE series have been installed in tens of thousands of boats around the world for almost three decades. We dare to claim that it is very hard to find a more sturdy and proven construction than that of the SE series.
Our tunnel thruster can be installed as bow and/or stern thruster and are delivered in both a standard and a PRO version. The PRO version are equipped with a DC speed control, which gives you full proportional control of the thruster. If you plan to install both bow and stern thruster, the system offers the unique Hold-function which pin the boat to the pier while docking.
“SE-IP” (ON/OFF) INGNITION PROTECTED BOW THRUSTER
Side-Power thruster in a gas- and watertight version. This is the second generation with more upgrades and a larger range of models. The IP versions has all the benefits and proven reliability as the SE series.
To provide reliable and safe thruster installations in more boats, we offer modified versions of our DC electric thruster in watertight housings for use in stern and other locations that may get wet or be exposed to gasoline fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with gasoline engines.
They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no gasoline fumes can enter and be ignited by sparks.
The other advantage is that the electric parts that could be damaged by water are also covered and protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.
|• Certified to ISO 8846 Ignition Protected standards.• Water proof (Not for submerged mounting)|
• Tinned plated brass terminals
• Manufactured, tested and delivered as a ready sealed unit, ensuring that the installer does
not have to fit any other parts that can jeopardize the hermetical seal.
|• Supplied with plug and go control cable.• Ignition protected housing can be opened and thereby retains serviceability of|
components inside the enclosure.
• Available as SEP-IP versions with DC Speed Control.
SE PRO series, Speed Control DC Thruster SIDE-POWER
“SEP” PRO SPEED CONTROL DC BOW THRUSTER
Yachtaid Marine has developed a solution that regulates the effect under all conditions. With the new DC Speed Control you can drive your thruster at any speed you want and therefore get perfect control over the thrust. If you install both an effect regulating bow and a stern thruster, you also get the unique Hold-function which holds the boat alongside the dock. It has never been easier to dock a boat on your own.
In 2011 the DC Speed Control system won the prestigious Innovation Award at the Miami Boat Show. This is the industry’s own award and is highly regarded by equipment manufacturers around the world.
INSTALLATION KIT BOW THRUSTER SIDE-POWER
Bow Thruster Side Power With Installation Kit
This listing includes:
- JOYSTICK or BOAT PANEL ROUND
- BOW TUNNEL
- ANL FUSE (X2)
- CONTROL HARNESS 4 WIRE
- CONTROL HARNESS 5 WIRE
- AUTOMATIC MAIN SWITCH/FUSE HOLDER
- ZINC ANODE (X2)
Marine Thruster: external bow thruster, bow thruster installation, bow thruster cost, vetus bow thruster, wesmar bow thruster, hydraulic bow thruster, lewmar bow thruster, yacht thruster price, yacht thruster cost, exturn bow thruster, yacht thruster 400d, yacht thruster for sale, yacht controller, bow thruster, installing a bow thruster, boat bow thruster price, boat bow thruster installation, marine bow thruster, electric bow thruster, stern thruster, bow thruster ships, azimuth bow thruster, small boat, thruster kit, bow thruster, stern thruster, hydraulic thruster, boat control system, boat bow thruster, sideshift bow thruster review, stern thruster prices, marine thruster, stern thruster, bow thruster ships, electric bow thruster, azimuth bow thruster, bow thruster yacht, lewmar, bow thruster installation, bow thruster for small boats, bow thruster for sailboats, bow thruster for, small boats, vetus bow thruster, stern thruster, lewmar bow thruster, bow thruster prices, side power bow thruster, side power, sidepower, side-power, thruster, thruster, imtra, side-power thruster, marine bow thruster, marine thruster, thruster units, tunnels installation kit, bow hruster 12v, bow thruster 24v.
Side-Power Thrusters – Marine Systems
Marine Thruster Systems
Bow & Stern Thrusters